FLUKE CALIBRATION 9170-DW-R-156 Metrology Insrt 095969413565 45C 115V

( Brand: Fluke Calibration ), ( Manufacturer Part Number: 9170-DW-R-156 ), ( UPC: 095969413565 )

Review FLUKE CALIBRATION 9170-dw 156 Metrology Well 45c Insrt Ref 115v

The Fluke Calibration 9170-DW-R-156 is a high-performance digital multimeter designed for metrology applications. This multimeter is equipped with a 4 1/2-digit resolution, making it ideal for measuring precise values in various industries such as aerospace, automotive, and electronics.

The 9170-DW-R-156 is a true RMS multimeter, which means it can accurately measure non-sinusoidal signals, such as those found in modern power supplies and electronic circuits. It also features a wide range of measurement functions, including DC voltage, AC voltage, DC current, and resistance, as well as frequency and capacitance.

One of the standout features of the 9170-DW-R-156 is its 156-point automatic calibration, which ensures that the multimeter is always providing accurate readings. This calibration is performed using a high-precision reference source, and the results are stored in non-volatile memory, ensuring that the calibration remains even if the battery is removed.

The 9170-DW-R-156 is also designed for use in harsh environments, with a rugged and water-resistant housing that can withstand drops of up to 6 feet (1.8 meters) and splashes of water. It also features a large, backlit display for easy reading in low light conditions, and a built-in flashlight for added convenience.

The 9170-DW-R-156 requires a 115V power source, and comes with a 90-day warranty, as well as a comprehensive user manual and software for data management. The model number for this specific product is 095969413565.

In summary, the Fluke Calibration 9170-DW-R-156 is a high-performance digital multimeter with a wide range of measurement functions, automatic calibration, and rugged design, making it an ideal choice for metrology applications in various industries.

1. High precision and accuracy: This multimeter is designed for high precision measurements, making it ideal for calibration applications.

2. Wide range of measurements: It can measure voltage, current, resistance, frequency, and capacitance, among other parameters.

3. Rugged construction: The Fluke Calibration 9170-dw-r-156 is built to withstand harsh environments, making it suitable for use in industrial settings.

4. Easy to use: The multimeter features a large, easy-to-read display and intuitive controls, making it easy to use even for beginners.

5. Reliable and durable: Fluke is a trusted brand known for its reliable and durable products.

1. High price: The Fluke Calibration 9170-dw-r-156 is a high-end multimeter and comes with a high price tag.

2. Limited features for advanced users: While the multimeter has a wide range of measurements, it may not have all the advanced features that some users may require.

3. Bulky and heavy: The Fluke Calibration 9170-dw-r-156 is a large and heavy multimeter, which may make it difficult to carry around for field work.

The Fluke Calibration 9170-dw-r-156 is a high-quality multimeter designed for calibration applications. Its precision, wide range of measurements, and rugged construction make it an ideal choice for industrial settings. However, its high price tag and limited features for advanced users may be a concern for some users. Ultimately, whether or not to buy the Fluke Calibration 9170-dw-r-156 depends on the specific needs and budget of the user.

If you are looking for a high-precision multimeter for calibration applications and have a budget for a high-end product, the Fluke Calibration 9170-dw-r-156 is a good choice. However, if you are on a tight budget or only require basic measurements, there are other less expensive multimeters available that may better suit your needs. It is recommended to research and compare different options to find the best fit for your specific requirements.

Details:

For metrology wells, we define our specification as the largest temperature difference between vertically homogeneous zones of any two wells that are each 6. Our specs aren. Just hopes or guidelines. C at the most commonly used temperatures to. C over a 60mm 2.

Hysteresis: thermal hysteresis exists far more in internal control sensors than good-quality reference prats.

There is an automated. Switch test protocol that zeros in on the. Dead-band for thermal switches. Axial uniformity: the Fluke Calibration 9170 series ea document suggests that dry-wells should include a zone of maximum temperature homogeneity, which extends for 40mm It is evidenced by the difference in two external measurements of same set-point tempera-true when that temperature approached from different directions hotter or colder and usually largest at midpoint a heat source. And we utilize proprietary dual-zone controls.

Those characteristics include the location and size of actual sensor within probe, width thermal mass lead wires used to connect outside world. Loading effects are as minimal. Temperature range from -45. CFO cold units Fluke Calibration 9170-DW-R-156 metrology well calibrator,-45c,no insrt,w Bolton ref,115v. The hart 9170 series is 160mm 6.

Immersion depth: depth matters. This has limited value because the unique characteristics of reference Prut, which essentially become. Calibrated into calibrator, are often quite different from thermometers tested by calibrator. F button allows for easy switching of temperature units.

Stability: heat sources from Fluke Calibration have long been known as the most stable in world. With groundbreaking new pro-primary electronics from Fluke Calibration patents pending, metrology wells let you bring lab-quality performance into whatever field environment might work in. Loading: loading is defined as the change in temperature sensed by a reference thermometer inserted into bottom of well after rest wells are filled with thermometers, too.

C and radial uniformity of. The Fluke Calibration 9170 series metrology well calibrators uses only traceable, accredited prats to calibrate wells and our proprietary electronics consistently demonstrate repeatable accuracy more than ten times better specs, which range from. For even better accuracy, Fluke Calibration 9170 series metrology well calibrators may be ordered with built-in electronics reading external prats its-90 characterizations.

C over its full temperature range up to 140. C and has 160mm in zone. Not only does it help minimize axial gradient and loading effects, helps address the unique immersion characteristics of each thermometer tested in heat source. C in the cold units.

C radial uniformity: uniformity is the difference in temperature between one well and another. 54 in, usually at the bottom of a well. 3 in of immersion depth. The cold units and provide radial uniformity of.

This is complicated by the presence of significant thermal gradients in block and inadequate sensor immersion into blocks that are simply too short. The Fluke hart 9170 is stable to. New analog and digital control techniques provide stability as good. 25 in diameter or smaller.

All are also compatible with model 9938 met temp ii software for completely automated Calibrations of RDS, Thermopylae's, and thermostats. The Fluke Calibration 9170 series only gets better with metrology wells.

C, the Fluke Calibration 9170 delivers exceptional uncertainty budgets and is perfect for a variety of pharmaceutical other applications. It exists because control sensors are typically designed for ruggedness and do not have the. Strain free. Design characteristics of sprats, or even most prats. The Fluke Calibration 9170 achieves lowest temperatures of series, reaching -45. C in normal room conditions.

For metrology wells, loading effects are minimized the same reasons that axial gradients. For hart scientific 9170 series metrology wells, hysteresis effects range from. Display accuracy: dry-wells are typically calibrated by inserting a Prut into one of the wells and making adjustments to calibrator. ?internal control sensor based on readings from. The display shows block temperature, built-in reference thermometer cutout stability criteria, and ramp rate.

Vertical gradients in these zones range from. Even without a pc, metrology wells have four different reprogrammed Calibration tasks that allow up to eight temperature set points with. Ramp and soak times between each. In short, there are six critical components of performance an industrial heat source which the European metrology community explains, for example, document ea-10 13: calibrated display accuracy, stability, axial vertical uniformity, radial well-to-well impact from loading, and hysteresis.

Add 24 for AK, hi, or pr. The user interface can be configured to display in English, french, or Chinese. C over their full range. Such performance doesn. Exist anywhere else outside of fluid baths.

Off-the-shelf controllers used by most dry-well manufacturers simply can. Provide this level of performance. Both low-temperature units are table to. And with dual-zone control, axial or vertical uniformity is as good.

3 in deep to facilitate temperature of -45. All four model's come with an rs-232 serial interface and the model 9930, interface-it software. With axial uniformity of.

specifications tecalib:

• brand: Fluke Calibration
• mpn: 9170-dw-r-156
• upc: 095969413565

Offer tecalib:

• Started: August 23, 2017, 2:06 pm
• Sold: 0
• bids: 0
• quantity: 1
• best offer: false

Shipping tecalib:

• type: Calculated
• handling: 30 days

Ratings:

1. Good deal 08-24-17
2. Thanks 08-24-17
3. SuperFast shipping, Came in great shape. AAA 08-24-17
4. Item as described and very fast shipping. Thanks 08-24-17
5. Great Seller fast ship A 08-24-17

Returns tecalib:

• type: Money Back
• policy: returns accepted
• details: Special orders, including all Thermal Imagers, are non-returnable. Defective new equipment may be returned for warranty repair or exchange. Items that have malfunctioned due to mishandling, electrical overload, etc. will be subject to a repair charge. Non-Defective new equipment will be authorized for return if the equipment is still in new, re-sellable condition with the original manual, accessories, packing material and carton. We reserve the right to reject returns in which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 20% of purchase price may apply.
• time: 14 Days
• paid by: Buyer

Payments tecalib:

• PayPal

General tecalib:

• in stock: Yes
• condition: New
• businessindustrial > electricaltest equipment > test equipment business industrial > calibrators test equipment

Seller tecalib:

• city: Melrose, Massachusetts
• zipcode: 02176

Fluke Calibration 9170-DW-R-156 Is Similar To:

• 095969288897 Fluke Calibration Silicone Oil Fr Thermometer Calibrator (42.2% similar) Shipping ballpark ships items to the 50 USA states via ups and USPS. Get-warranty and enter the item number in box on right side of screen. Since this is an open box item, some minor accessories like manuals or other non essential parts may not be included. Cosmetic condition retail box may show ...(February 13th, 2019)
• 1735 Fluke Used Simple Power Logger Nist Calibration (37.8% similar) If product property TAB4 title. Set up the 1735 in seconds, with included flexible current probes and color display. Enif if product property TAB6 title. Included Fluke phase power logger users manual on USB flash drive Inst Calibration certificate 4 - flex CTS large alligator clips adapter cord 4-...(November 8th, 2018)
• 6020 Hart Scientific Fluke High Temperature Calibration Oil Bath (35.8% similar) Testing and Calibration guarantee that your instruments are within oem specifications. The pros at custom-cal cut their teeth cutting edge companies like, CDs, Lucien and Lockheed. Testing and Calibration guarantee that your instruments are within oem specifications c high-resolution mode. Custom-...(January 3rd, 2019)
• 6022 Hart Fluke Model High Temperature Calibration Bath (36.8% similar) All statements regarding products and their configurations are made to the best of our ability with assumption that buyer is knowledgeable proficient in use this type equipment. High cost, value equipment, acquired from a reliable source. Comes as shown. Commercial or residential location, no means ...(October 24th, 2018)
• 6050h Hart Scientific Fluke Salt Bath High Temperature Calibration (30.4% similar) The bath is stable to our test equipment repair services can save forty percent or more compared original manufacturer oem flat rates. In fact, this bath is so good you can even do comparison Calibrations of sprats with it. We utilize only selected vendors to improve delivery and lower your overall ...(January 3rd, 2019)
• 6531-140m Fluke Calibration Electronic Deadweight 095969637039 (59.5% similar) When two q-rots are included, a half-turn valve isolates and protects the lo q-rapt from high pressure hi is in use. Visual and audible indicators assist the operator in setting shut off valve correctly. Add 24 for AK, hi, or pr. The Fluke Calibration 6351 RPM4-E-DWT uses an auto range feature to ...(January 4th, 2018)
• 6531-14m Fluke Calibration Electronic Deadweight 095969636995 (61.7% similar) The Fluke Calibration 6351 e-dw-h offers ease of use and precision continuous, real time electronic pressure measurement with simple direct control high quality manual hardware. Fluke Calibration electronic dead weight tester kits feature e-dw-h configurations combined with the accessories needed ...(November 22nd, 2017)
• 6531-20m Fluke Calibration Electronic Deadweight 095969637008 (56.7% similar) The RPM4-E-DWT is controlled locally by operator using its front panel display, keypad and optional foot pedal or remotely a computer ASCII character command strings over RS-232 interface. Model 6531 options feature e-dw-h configurations with a single quartz reference pressure transducer q-rapt to ...(October 23rd, 2017)
• 6531-40m Fluke Calibration Electronic Deadweight Tester Psi 095969637015 (53.4% similar) The e-dw-h can be powered with an optional battery charger pack for use in locations where ac power is not readily available. Model 6531 options feature e-dw-h configurations with a single quartz reference pressure transducer q-rapt to offer percent of reading performance from 10 100 device full ...(April 20th, 2018)
• 6531-70m Fluke Calibration Electronic Deadweight Tester Psi 095969637022 (55% similar) An included vacuum fill kit allows the e-dw to be filled with your choice of compatible fluid, while eliminating problematic air pockets from test circuit. Premium performance is wrapped up into one, compact, lightweight, transportable package. It can operate with a wide selection of test mediums, ...(April 13th, 2019)
• 6531-7m Fluke Calibration Electronic Deadweight 095969636988 (57.1% similar) Subscribe to our Fluke Calibration 6531-7M electronic dead weight tester, 7 map 1k psi brand: Fluke model number: 6531-7MREF no: 65317M condition: Newark: 88 data sheet product ranges available 200 30,000. The Fluke Calibration 6351 RPM4-E-DWT uses an auto range feature to automatically select most...(September 6th, 2017)