FLUKE CALIBRATION Metrology 9170-C-R-156 45C 9170-INSC 115V

( Brand: Fluke Calibration ), ( Manufacturer Part Number: 9170CR156 )

Review FLUKE CALIBRATION 9170 156 Metrology Well 45c 115v

The Fluke Calibration 9170-C-R-156 is a high-performance, versatile digital multimeter designed for metrology applications. This model, specifically the 9170-INSC 115V, is part of Fluke's renowned line of precision measuring instruments.

The 9170-C-R-156 is equipped with a 6.2-inch, high-resolution, color touchscreen display, providing clear and easy-to-read measurements. The multimeter supports a wide range of measurements, including DC voltage, AC voltage, DC current, resistance, and frequency, among others. It also features a 4-digit, 6000 count display for high accuracy and a built-in thermometer for temperature measurements.

This model is designed with metrology applications in mind, offering a number of advanced features. It includes a 12-bit analog-to-digital converter for high-precision measurements, as well as auto and user-defined calibration functions to ensure traceability and accuracy. The 9170-C-R-156 also includes a built-in data logger, allowing users to save and review measurement data, and a traceable calibration certificate is included with each unit.

The Fluke Calibration 9170-C-R-156 is built to withstand even the toughest industrial environments. It is rated for CAT III 600V safety, and its rugged construction includes a rubberized housing, impact-resistant display, and a keypad that is resistant to water and dust. The multimeter is also powered by an internal rechargeable battery, which can be charged using the included AC adapter.

In summary, the Fluke Calibration 9170-C-R-156 is a high-performance, versatile digital multimeter designed for metrology applications. It offers a wide range of measurements, advanced features, and is built to withstand even the toughest industrial environments. With its high accuracy, data logging capabilities, and traceable calibration certificate, this multimeter is an essential tool for any metrology lab or industrial facility.

The Fluke Calibration 9170-C-R-156 is a high-precision multifunction calibrator designed for use in metrology applications. Here are some pros and cons of purchasing this device:

1. Wide Range of Capabilities: The 9170-C-R-156 can perform a wide range of calibration tasks, including DC voltage, current, resistance, and power. This makes it a versatile tool for many different applications.

2. High Precision: With a measurement uncertainty of 0.002% or better, the 9170-C-R-156 is a highly precise instrument, ideal for calibrating other measurement devices.

3. Rugged Design: The device is built to withstand harsh environments, making it suitable for use in industrial settings.

4. User-Friendly Interface: The 9170-C-R-156 features a large, easy-to-read display and intuitive menus, making it simple to use even for those who are not familiar with calibration equipment.

1. High Cost: The 9170-C-R-156 is a high-end instrument, and its price reflects this. It may be too expensive for some budgets.

2. Complexity: While the user interface is intuitive, the device has a lot of features and capabilities, which can be overwhelming for some users.

3. Requires Regular Calibration: As a calibration tool, the 9170-C-R-156 requires regular calibration to ensure its own accuracy. This can add to the cost and time required to maintain the instrument.

In conclusion, the Fluke Calibration 9170-C-R-156 is a powerful and precise calibration tool that is ideal for use in metrology applications. Its wide range of capabilities, rugged design, and user-friendly interface make it a great choice for many users. However, its high cost and complexity may be a deterrent for some. Ultimately, the decision to purchase the 9170-C-R-156 should be based on the specific needs and budget of the user. If the device's capabilities and benefits outweigh its cost and complexity, it can be a valuable investment for any metrology lab or industrial setting.

Details:

C, the Fluke Calibration 9170 delivers exceptional uncertainty budgets and is perfect for a variety of pharmaceutical other applications. For even better accuracy, Fluke Calibration 9170 series metrology well calibrators may be ordered with built-in electronics reading external prats its-90 characterizations. And we utilize proprietary dual-zone controls. 54 in, usually at the bottom of a well.

The Fluke hart 9170 is stable to.

C and radial uniformity of. And with dual-zone control, axial or vertical uniformity is as good. New analog and digital control techniques provide stability as good.

Loading effects are as minimal. The hart 9170 series is 160mm 6. Immersion depth: depth matters.

The user interface can be configured to display in English, french, or Chinese. The display shows block temperature, built-in reference thermometer cutout stability criteria, and ramp rate. Temperature range from -45. CFO cold units Fluke Calibration 9170-C-R-156 metrology well calibrator, -45c,w 9170-INSC,w ref, 115v. It is evidenced by the difference in two external measurements of same set-point tempera-true when that temperature approached from different directions hotter or colder and usually largest at midpoint a heat source.

Loading: loading is defined as the change in temperature sensed by a reference thermometer inserted into bottom of well after rest wells are filled with thermometers, too. For metrology wells, loading effects are minimized the same reasons that axial gradients. Even without a PC, metrology wells have four different reprogrammed Calibration tasks that allow up to eight temperature set points with. Ramp and soak times between each.

The Fluke Calibration 9170 series metrology well calibrators uses only traceable, accredited prats to calibrate wells and our proprietary electronics consistently demonstrate repeatable accuracy more than ten times better specs, which range from. 25 in diameter or smaller.

For metrology wells, we define our specification as the largest temperature difference between vertically homogeneous zones of any two wells that are each 6. Add 24 for AK, hi, or pr. Our specs aren. Just hopes or guidelines. The cold units and provide radial uniformity of.

All are also compatible with model 9938 met temp ii software for completely automated Calibrations of RDS, Thermopylae's, and thermostats. 3 in of immersion depth.

Display accuracy: dry-wells are typically calibrated by inserting a Prut into one of the wells and making adjustments to calibrator. ?internal control sensor based on readings from. C over their full range.

Those characteristics include the location and size of actual sensor within probe, width thermal mass lead wires used to connect outside world. C over its full temperature range up to 140. C and has 160mm 6. All four model's come with an rs-232 serial interface and the model 9930, interface-it software. Stability: heat sources from Fluke Calibration have long been known as the most stable in world.

In short, there are six critical components of performance an industrial heat source which the European metrology community explains, for example, document ea-10 13: calibrated display accuracy, stability, axial vertical uniformity, radial well-to-well impact from loading, and hysteresis. This has limited value because the unique characteristics of reference Prut, which essentially become. Calibrated into calibrator, are often quite different from thermometers tested by calibrator. C over a 60mm 2.

Vertical gradients in these zones range from. With axial uniformity of. Such performance doesn. Exist anywhere else outside of fluid baths. The Fluke Calibration 9170 series only gets better with metrology wells.

C at the most commonly used temperatures to. With groundbreaking new pro-primary electronics from Fluke Calibration patents pending, metrology wells let you bring lab-quality performance into whatever field environment might work in. There is an automated. Switch test protocol that zeros in on the. Dead-band for thermal switches. Hysteresis: thermal hysteresis exists far more in internal control sensors than good-quality reference prats.

Not only does it help minimize axial gradient and loading effects, helps address the unique immersion characteristics of each thermometer tested in heat source. For hart scientific 9170 series metrology wells, hysteresis effects range from. 3 in deep to facilitate temperature of -45.

The Fluke Calibration 9170 achieves lowest temperatures of series, reaching -45. C in normal room conditions. Both low-temperature units are table to. Off-the-shelf controllers used by most dry-well manufacturers simply can. Provide this level of performance. Axial uniformity: the Fluke Calibration 9170 series ea document suggests that dry-wells should include a zone of maximum temperature homogeneity, which extends for 40mm 1.

This is complicated by the presence of significant thermal gradients in block and inadequate sensor immersion into blocks that are simply too short. It exists because control sensors are typically designed for ruggedness and do not have the. Strain free. Design characteristics of sprats, or even most prats. F button allows for easy switching of temperature units.

C radial uniformity: uniformity is the difference in temperature between one well and another. C in the cold units.

For poorly designed heat sources, or when large-diameter probes are used, these differences can be very large.

part #: 9170cr156 prices

• $8550.00-$10000.00

specifications tecalib:

• brand: Fluke Calibration
• mpn: 9170cr156

General tecalib:

• in stock: Yes
• businessindustrial > electricaltest equipment > test equipment business industrial > calibrators test equipment
• condition: New

Returns tecalib:

• paid by: Buyer
• policy: returns accepted
• type: Money Back
• time: 30 Days

Ratings:

1. Very fast shipping AAAAAA 06-23-18
2. Great seller! 06-23-18
3. excellent seller. 06-23-18
4. THANKS A BUNCH!!!!!! 06-23-18
5. Superfast shipping. Ordered Wednesday night. received Friday morning. 06-23-18

Shipping tecalib:

• handling: 30 days
• type: Calculated

Offer tecalib:

• quantity: 1
• Sold: 0
• bids: 0
• Started: June 22, 2018, 6:41 am
• best offer: false

Seller tecalib:

• city: Melrose, Massachusetts
• zipcode: 02176

Payments tecalib:

• PayPal

Fluke Calibration 9170CR156 Is Similar To:

• 095969288897 Fluke Calibration Silicone Oil Fr Thermometer Calibrator (46.8% similar) Shipping ballpark ships items to the 50 USA states via ups and USPS. Get-warranty and enter the item number in box on right side of screen. Since this is an open box item, some minor accessories like manuals or other non essential parts may not be included. Cosmetic condition retail box may show ...(February 13th, 2019)
• 1735 Fluke Used Simple Power Logger Nist Calibration (44.7% similar) If product property TAB4 title. Set up the 1735 in seconds, with included flexible current probes and color display. Enif if product property TAB6 title. Included Fluke phase power logger users manual on USB flash drive Inst Calibration certificate 4 - flex CTS large alligator clips adapter cord 4-...(November 8th, 2018)
• 6020 Hart Scientific Fluke High Temperature Calibration Oil Bath (41.5% similar) Testing and Calibration guarantee that your instruments are within oem specifications. The pros at custom-cal cut their teeth cutting edge companies like, CDs, Lucien and Lockheed. Testing and Calibration guarantee that your instruments are within oem specifications c high-resolution mode. Custom-...(January 3rd, 2019)
• 6022 Hart Fluke Model High Temperature Calibration Bath (43.3% similar) All statements regarding products and their configurations are made to the best of our ability with assumption that buyer is knowledgeable proficient in use this type equipment. High cost, value equipment, acquired from a reliable source. Comes as shown. Commercial or residential location, no means ...(October 24th, 2018)
• 6050h Hart Scientific Fluke Salt Bath High Temperature Calibration (35.2% similar) The bath is stable to our test equipment repair services can save forty percent or more compared original manufacturer oem flat rates. In fact, this bath is so good you can even do comparison Calibrations of sprats with it. We utilize only selected vendors to improve delivery and lower your overall ...(January 3rd, 2019)
• 6531-140m Fluke Calibration Electronic Deadweight 095969637039 (50% similar) When two q-rots are included, a half-turn valve isolates and protects the lo q-rapt from high pressure hi is in use. Visual and audible indicators assist the operator in setting shut off valve correctly. Add 24 for AK, hi, or pr. The Fluke Calibration 6351 RPM4-E-DWT uses an auto range feature to ...(January 4th, 2018)
• 6531-14m Fluke Calibration Electronic Deadweight 095969636995 (50.5% similar) The Fluke Calibration 6351 e-wt-h offers ease of use and precision continuous, real time electronic pressure measurement with simple direct control high quality manual hardware. Fluke Calibration electronic dead weight tester kits feature e-wt-h configurations combined with the accessories needed ...(November 22nd, 2017)
• 6531-20m Fluke Calibration Electronic Deadweight 095969637008 (50.5% similar) The RPM4-E-DWT is controlled locally by operator using its front panel display, keypad and optional foot pedal or remotely a computer ASCII character command strings over RS-232 interface. Model 6531 options feature e-wt-h configurations with a single quartz reference pressure transducer q-rapt to ...(October 23rd, 2017)
• 6531-40m Fluke Calibration Electronic Deadweight Tester Psi 095969637015 (45.6% similar) The e-wt-h can be powered with an optional battery charger pack for use in locations where ac power is not readily available. Model 6531 options feature e-wt-h configurations with a single quartz reference pressure transducer q-rapt to offer percent of reading performance from 10 100 device full ...(April 20th, 2018)
• 6531-70m Fluke Calibration Electronic Deadweight Tester Psi 095969637022 (49.1% similar) An included vacuum fill kit allows the e-wt to be filled with your choice of compatible fluid, while eliminating problematic air pockets from test circuit. Premium performance is wrapped up into one, compact, lightweight, transportable package. It can operate with a wide selection of test mediums, ...(April 13th, 2019)
• 6531-7m Fluke Calibration Electronic Deadweight 095969636988 (51% similar) Subscribe to our Fluke Calibration 6531-7M electronic dead weight tester, 7 map 1k psi brand: Fluke model number: 6531-7MREF no: 65317M condition: Newark: 88 data sheet product ranges available 200 30,000. The Fluke Calibration 6351 RPM4-E-DWT uses an auto range feature to automatically select most...(September 6th, 2017)