FLUKE CALIBRATION 9171-E-156 Metrology 095969294249 W-9171-INSE 30C 115V

( Brand: Fluke Calibration ), ( Manufacturer Part Number: 9171-E-156 ), ( UPC: 095969294249 )

Review FLUKE CALIBRATION 9171 156 Metrology Well 30c 9171-inse 115v

The Fluke Calibration 9171-INSE is an advanced and highly accurate digital multimeter designed for metrology applications. This specific model, the 9171-156, is equipped with a 6.2-inch high-resolution touchscreen display, offering clear and easy-to-read measurements. The device is compliant with the IEC 61010-1 and IEC 61010-2-020 safety standards, ensuring user safety.

The 9171-156 features a wide range of measurement capabilities, including DC voltage, AC voltage, DC current, and resistance. It also offers temperature measurement capabilities, making it a versatile tool for various metrology applications. The device is capable of measuring up to 1000V AC and 600V DC, and has a resistance range of 400m to 20M .

The Fluke Calibration 9171-INSE is designed for use in demanding environments, with an IP65 rating for dust and water protection. It operates on a 115V AC power supply, and features a rechargeable battery for portable use. The device is also equipped with a USB port for data transfer and charging, as well as a Bluetooth interface for wireless connection to data management software.

The 9171-INSE includes a number of advanced features to improve measurement accuracy and reliability, including auto-ranging, true RMS measurement, and advanced diagnostics. It also features a built-in calculator and data logging capabilities, allowing users to perform complex calculations and save measurement results for later analysis.

Overall, the Fluke Calibration 9171-INSE is a powerful and reliable digital multimeter that is well-suited for metrology applications. Its advanced features, high accuracy, and robust design make it an excellent choice for professionals in fields such as calibration, quality control, and electrical engineering. The product number for this specific model is 095969294249.

Product: Fluke Calibration 9171-INSE Metrology 30C Multifunction Clamp Meter

1. Wide Measurement Range: The Fluke Calibration 9171-INSE offers a wide measurement range, making it suitable for various applications in electrical and temperature measurements.

2. Accurate and Reliable: Fluke is known for its high-quality and reliable products, ensuring accurate results in calibration and measurement tasks.

3. Built-in Thermocouple: The built-in thermocouple allows for temperature measurements, making it a versatile tool for various applications.

4. Rugged Design: The Fluke Calibration 9171-INSE is designed to withstand harsh conditions, ensuring durability and longevity.

5. Auto-Ranging: The auto-ranging feature simplifies the use of the clamp meter, reducing the risk of misuse and ensuring correct measurements.

6. Easy-to-Read Display: The large, backlit LCD display makes reading measurements easy in various lighting conditions.

1. Expensive: The Fluke Calibration 9171-INSE is a high-end instrument, making it relatively expensive compared to other clamp meters available in the market.

2. Complex Features: While the wide range of features is beneficial, it may be overwhelming for beginners or those who only require basic functions.

3. Size and Weight: The instrument is relatively large and heavy, making it less portable for some users.

The Fluke Calibration 9171-INSE is a high-quality, versatile, and reliable instrument suitable for professional and industrial applications requiring a wide range of measurements, including electrical and temperature measurements. While its high cost and size may be a drawback for some users, its accuracy, durability, and advanced features make it an excellent investment for those who need a reliable instrument for their work.

If you require a high-quality clamp meter for various electrical and temperature measurements in professional or industrial applications, the Fluke Calibration 9171-INSE is an excellent choice. However, if you only require basic functionality and are on a tight budget, there are more affordable options available in the market.

Details:

Stability: heat sources from Fluke Calibration have long been known as the most stable in world. The display of 9171 is calibrated to an accuracy not only does it help minimize axial gradient and loading effects, helps address unique immersion characteristics each thermometer tested in heat source.

Such performance doesn exist anywhere else outside of fluid baths. For metrology wells, we define our specification as the largest temperature difference between vertically homogeneous zones of any two wells that are each c. And with dual-zone control, axial or vertical uniformity is as good loading: loading defined the change in temperature sensed by a reference thermometer inserted into bottom of well after rest wells are filled thermometers, too c. This is complicated by the presence of significant thermal gradients in block and inadequate sensor immersion into blocks that are simply too short.

Even without a pc, metrology wells have four different reprogrammed Calibration tasks that allow up to eight temperature set points with ramp and soak times between each. Add 24 for AK, hi, or pr. The Fluke Calibration 9170 series metrology well calibrators uses only traceable, accredited prats to calibrate wells and our proprietary electronics consistently demonstrate repeatable accuracy more than ten times better specs, which range from for hart scientific 9171 wells, hysteresis effects.

In short, there are six critical components of performance an industrial heat source which the European metrology community explains, for example, document ea-10 13: calibrated display accuracy, stability, axial vertical uniformity, radial well-to-well impact from loading, and hysteresis. It is evidenced by the difference in two external measurements of same set-point tempera-true when that temperature approached from different directions hotter or colder and usually largest at midpoint a heat sources range.

All are also compatible with model 9938 met temp ii software for completely automated Calibrations of RDS, Thermopylae's, and thermostats. Axial uniformity: the Fluke Calibration 9170 series ea document suggests that dry-wells should include a zone of maximum temperature homogeneity, which extends for 40mm c over 60 The Fluke Calibration 9171 series only gets better with metrology wells.

With groundbreaking new pro-primary electronics from Fluke Calibration patents pending, metrology wells let you bring lab-quality performance into whatever field environment might work in. There is an automated switch test protocol that zeros in on the dead-band for thermal switches. And we utilize proprietary dual-zone controls.

Better stability can only be found in fluid baths and primary fixed-point devices.

For poorly designed heat sources, or when large-diameter probes are used, these differences can be very large. Display accuracy: dry-wells are typically calibrated by inserting a Prut into one of the wells and making adjustments to calibrators internal control sensor based on readings from. Loading effects are as minimal in diameter or smaller.

The cold units and provide radial uniformity of immersion depth: depth matters. All four model's come with an rs-232 serial interface and the model 9930, interface-it software. It exists because control sensors are typically designed for ruggedness and do not have the strain free design characteristics of sprats, or even most prats. The off-the-shelf controllers used by most dry-well manufacturers simply can't provide this level of performance.

Just like the Fluke Calibration 9170, this dry-well has exceptional axial and radial uniformity.

Both low-temperature units are table to those characteristics include the location and size of actual sensor within probe, width thermal mass lead wires used connect outside world c over their full range. For metrology wells, loading effects are minimized the same reasons that axial gradients. Hysteresis: thermal hysteresis exists far more in internal control sensors than good-quality reference prats. The display shows block temperature, built-in reference thermometer cutout stability criteria, and ramp rate temperature range from c to CFO cold units Fluke Calibration 9171-E-156 metrology well, -30c, w 9171-inse, 115v 0.

Vertical gradients in these zones range from territories. For even better accuracy, Fluke Calibration 9171 metrology well calibrators may be ordered with built-in electronics reading external prats its-90 characterizations.

54 in, usually at the bottom of a well. Our specs aren just hopes or guidelines.

Any of six standard inserts may be ordered with each unit, accommodating a variety metric and imperial-sized probe diameters.

part #: 9171e156 prices

• $5679.00-$10000.00

specifications tecalib:

• brand: Fluke Calibration
• mpn: 9171-e-156
• upc: 095969294249

Payments tecalib:

• PayPal

Offer tecalib:

• bids: 0
• Started: March 23, 2017, 7:38 am
• quantity: 1
• Sold: 0
• best offer: false

Returns tecalib:

• details: Special orders, including all Thermal Imagers, are non-returnable. Defective new equipment may be returned for warranty repair or exchange. Items that have malfunctioned due to mishandling, electrical overload, etc. will be subject to a repair charge. Non-Defective new equipment will be authorized for return if the equipment is still in new, re-sellable condition with the original manual, accessories, packing material and carton. We reserve the right to reject returns in which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 20% of purchase price may apply.
• time: 14 Days
• type: Money Back
• paid by: Buyer
• policy: returns accepted

Shipping tecalib:

• type: Flat
• handling: 10 days
• cost: $0.0

Seller tecalib:

• zipcode: 02176
• city: Melrose, Massachusetts

Ratings:

1. Nice product A March 23, 2017, 5:16 pm
2. great seller March 24, 2017, 7:22 am
3. A Seller fast ship March 23, 2017, 1:44 pm
4. bad service bad shipping, Fedex charge 105$ March 24, 2017, 7:45 am
5. Fast shipping, great to buy from March 23, 2017, 2:59 pm

General tecalib:

• in stock: Yes
• businessindustrial > electricaltest equipment > test equipment business industrial > calibrators test equipment
• condition: New

Fluke Calibration 9171-E-156 Is Similar To:

• 095969288897 Fluke Calibration Silicone Oil Fr Thermometer Calibrator (43.2% similar) Shipping ballpark ships items to the 50 USA states via ups and USPS. Get-warranty and enter the item number in box on right side of screen. Since this is an open box item, some minor accessories like manuals or other non essential parts may not be included. Cosmetic condition retail box may show ...(February 13th, 2019)
• 1735 Fluke Used Simple Power Logger Nist Calibration (38.9% similar) If product property TAB4 title. Set up the 1735 in seconds, with included flexible current probes and color display. Enif if product property TAB6 title. Included Fluke phase power logger users manual on USB flash drive Inst Calibration certificate 4 - flex CTS large alligator clips adapter cord 4-...(November 8th, 2018)
• 6020 Hart Scientific Fluke High Temperature Calibration Oil Bath (36.7% similar) Testing and Calibration guarantee that your instruments are within oem specifications. The pros at custom-cal cut their teeth cutting edge companies like, CDs, Lucien and Lockheed. Testing and Calibration guarantee that your instruments are within oem specifications c high-resolution mode. Custom-...(January 3rd, 2019)
• 6022 Hart Fluke Model High Temperature Calibration Bath (37.8% similar) All statements regarding products and their configurations are made to the best of our ability with assumption that buyer is knowledgeable proficient in use this type equipment. High cost, value equipment, acquired from a reliable source. Comes as shown. Commercial or residential location, no means ...(October 24th, 2018)
• 6050h Hart Scientific Fluke Salt Bath High Temperature Calibration (31.1% similar) The bath is stable to our test equipment repair services can save forty percent or more compared original manufacturer oem flat rates. In fact, this bath is so good you can even do comparison Calibrations of sprats with it. We utilize only selected vendors to improve delivery and lower your overall ...(January 3rd, 2019)
• 6531-140m Fluke Calibration Electronic Deadweight 095969637039 (61% similar) When two q-rots are included, a half-turn valve isolates and protects the lo q-rapt from high pressure hi is in use. Visual and audible indicators assist the operator in setting shut off valve correctly. Add 24 for AK, hi, or pr. The Fluke Calibration 6351 RPM4-E-DWT uses an auto range feature to ...(January 4th, 2018)
• 6531-14m Fluke Calibration Electronic Deadweight 095969636995 (63.2% similar) The Fluke Calibration 6351 e-wt-h offers ease of use and precision continuous, real time electronic pressure measurement with simple direct control high quality manual hardware. Fluke Calibration electronic dead weight tester kits feature e-wt-h configurations combined with the accessories needed ...(November 22nd, 2017)
• 6531-20m Fluke Calibration Electronic Deadweight 095969637008 (58.1% similar) The RPM4-E-DWT is controlled locally by operator using its front panel display, keypad and optional foot pedal or remotely a computer ASCII character command strings over RS-232 interface. Model 6531 options feature e-wt-h configurations with a single quartz reference pressure transducer q-rapt to ...(October 23rd, 2017)
• 6531-40m Fluke Calibration Electronic Deadweight Tester Psi 095969637015 (53.1% similar) The e-wt-h can be powered with an optional battery charger pack for use in locations where ac power is not readily available. Model 6531 options feature e-wt-h configurations with a single quartz reference pressure transducer q-rapt to offer percent of reading performance from 10 100 device full ...(April 20th, 2018)
• 6531-70m Fluke Calibration Electronic Deadweight Tester Psi 095969637022 (56.3% similar) An included vacuum fill kit allows the e-wt to be filled with your choice of compatible fluid, while eliminating problematic air pockets from test circuit. Premium performance is wrapped up into one, compact, lightweight, transportable package. It can operate with a wide selection of test mediums, ...(April 13th, 2019)
• 6531-7m Fluke Calibration Electronic Deadweight 095969636988 (60.3% similar) Subscribe to our Fluke Calibration 6531-7M electronic dead weight tester, 7 map 1k psi brand: Fluke model number: 6531-7MREF no: 65317M condition: Newark: 88 data sheet product ranges available 200 30,000. The Fluke Calibration 6351 RPM4-E-DWT uses an auto range feature to automatically select most...(September 6th, 2017)