FLUKE CALIBRATION 9173-C-156 Metrology 095969294645 W-9173-INSC 700C 115V

( Brand: Fluke Calibration ), ( Manufacturer Part Number: 9173-C-156 ), ( UPC: 095969294645 )

Review FLUKE CALIBRATION 9173 156 Metrology Well 700c 9173-insc 115v

The Fluke Calibration 9173 InSight is a high-performance, handheld multimeter designed for metrology applications. This 156-function multimeter, model number 9173-INSC, is equipped with a wide range of measurement capabilities, making it an ideal tool for calibration, troubleshooting, and maintenance tasks in various industries.

The 9173-INSC features a large, high-resolution, backlit LCD display that provides clear and easily readable results. It supports 115V AC voltage measurements, making it suitable for use in North American electrical systems. The multimeter also includes a data hold function, which allows you to freeze and save measurements for later reference.

One of the key features of the Fluke Calibration 9173-INSC is its advanced auto-ranging technology. This technology enables the multimeter to automatically select the appropriate measurement range, reducing the risk of incorrect readings and ensuring accurate results. The 9173-INSC also includes a built-in temperature sensor, allowing you to measure and record temperature data alongside your electrical measurements.

The 9173-INSC is a rugged and durable instrument, designed to withstand the demands of a busy workshop or field environment. It is water-resistant, has a drop-test rating of 2 meters, and is equipped with a rechargeable battery that provides up to 30 hours of continuous use.

In summary, the Fluke Calibration 9173-INSC is a powerful and versatile multimeter that is ideal for metrology applications. Its wide range of functions, large display, and advanced auto-ranging technology make it easy to use and ensure accurate results. Its rugged design and long battery life make it a reliable tool for use in challenging environments. The item's model number is 9173-INSC, and its product ID is 095969294645.

The Fluke Calibration 9173-INSC Metrology 700C is a high-precision digital multimeter designed for calibration and measurement applications. Here are some pros and cons of buying this device:

1. High Accuracy: The Fluke 9173-INSC is a high-precision device with a measurement uncertainty of 0.005% of reading, making it suitable for calibration and measurement applications.

2. Wide Measurement Range: The device can measure voltage, current, and resistance from DC to 1000MHz, making it versatile for various applications.

3. Advanced Features: The Fluke 9173-INSC has advanced features such as auto/manual range selection, DC voltage/current measurement, and a built-in thermocouple compensator.

4. Rugged Design: The device is designed to withstand harsh environments, with a high IP rating and a drop resistance of up to 2 meters.

1. High Price: The Fluke 9173-INSC is a high-end device, and its price may be prohibitive for some users.

2. Complexity: The device has a lot of advanced features, which can be overwhelming for users who are not familiar with calibration and measurement equipment.

3. Limited Battery Life: The device uses AA batteries, which may not provide enough power for long measurement sessions.

The Fluke Calibration 9173-INSC Metrology 700C is a high-precision digital multimeter designed for calibration and measurement applications. Its high accuracy, wide measurement range, and advanced features make it suitable for use in various industries. However, its high price and complexity may be a deterrent for some users. If you are looking for a high-precision digital multimeter for calibration and measurement applications, the Fluke 9173-INSC is a good option to consider.

If you are looking for a high-precision digital multimeter for calibration and measurement applications, the Fluke Calibration 9173-INSC Metrology 700C is a good option to consider. However, before making a purchase, make sure to review its specifications and features to ensure that it meets your specific needs and budget. Additionally, consider investing in a high-capacity battery to ensure that you have enough power for long measurement sessions.

Details:

Stability and uniformity performance of this unit are enough to dramatically reduce uncertainty budgets for Calibrations thermometers at high temperatures. In fact, Fluke Calibration makes and will continue to make some of the best performing, portable, fast dry-wells world. New analog and digital control techniques provide stability as good. C in the cold units.

Any of six standard inserts may be ordered with each unit, accommodating a variety metric and imperial-sized probe diameters. Of course, there. Dry block calibrators.

54 in, usually at the bottom of a well. Even without a pc, metrology wells have four different reprogrammed Calibration tasks that allow up to eight temperature set points with. Ramp and soak times between each. For metrology wells, loading effects are minimized the same reasons that axial gradients. Off-the-shelf controllers used by most dry-well manufacturers simply can. Provide this level of performance.

All four model's come with an rs-232 serial interface and the model 9930, interface-it software. It is evidenced by the difference in two external measurements of same set-point tempera-true when that temperature approached from different directions hotter or colder and usually largest at midpoint a heat source.

With groundbreaking new pro-primary electronics from Fluke Calibration patents pending, metrology wells let you bring lab-quality performance into whatever field environment might work in. It exists because control sensors are typically designed for ruggedness and do not have the. Strain free. Design characteristics of sprats, or even most prats. The Fluke Calibration 9173 has a display accuracy of.

Stability: heat sources from Fluke Calibration have long been known as the most stable in world.

C and an immersion depth of 203mm 8 in.

C radial uniformity: uniformity is the difference in temperature between one well and another. C at the most commonly used temperatures to. For even better accuracy, Fluke Calibration 9170 series metrology well calibrators may be ordered with built-in electronics reading external prats its-90 characterizations.

For hart scientific 9170 series metrology wells, hysteresis effects range from. Immersion depth: depth matters. The Fluke Calibration 9170 series metrology well calibrators uses only traceable, accredited prats to calibrate wells and our proprietary electronics consistently demonstrate repeatable accuracy more than ten times better specs, which range from. Loading effects are as minimal.

For work between 50. C, the Fluke Calibration 9173 provides unmatched performance. Our specs aren. Just hopes or guidelines. The Fluke Calibration 9171 series only gets better with metrology wells.

C over their full range. The hart scientific 9170 series metrology wells feature well depths of 203mm 8 in Fluke Calibration 9171, 9172, and zone. Such performance doesn. Exist anywhere else outside of fluid baths.

Not only does it help minimize axial gradient and loading effects, helps address the unique immersion characteristics of each thermometer tested in heat source. In short, there are six critical components of performance an industrial heat source which the European metrology community explains, for example, document ea-10 13: calibrated display accuracy, stability, axial vertical uniformity, radial well-to-well impact from loading, and hysteresis. Display accuracy: dry-wells are typically calibrated by inserting a Prut into one of the wells and making adjustments to calibrator. ?internal control sensor based on readings from. 25 in diameter or smaller.

This has limited value because the unique characteristics of reference Prut, which essentially become. Calibrated into calibrator, are often quite different from thermometers tested by calibrator.There is an automated. Switch test protocol that zeros in on the. Dead-band for thermal switches.

The hot units and range from. 3 in deep to facilitate temperature of -45. C over a 60mm 006. Temperature range from 50. Cc Fluke Calibration 9173-C-156 metrology well calibrator, 700c, w 9173-insc, 115v.

For poorly designed heat sources, or when large-diameter probes are used, these differences can be very large. Both low-temperature units are table to. The hart 9170 series is 160mm 6. For metrology wells, we define our specification as the largest temperature difference between vertically homogeneous zones of any two wells that are each 6.

And with dual-zone control, axial or vertical uniformity is as good. And we utilize proprietary dual-zone controls.

Vertical gradients in these zones range from. Even the 700. C unit model achieves stability of.

still nothing better for a quick test of industrial temperature sensor performance. This is complicated by the presence of significant thermal gradients in block and inadequate sensor immersion into blocks that are simply too short. Those characteristics include the location and size of actual sensor within probe, width thermal mass lead wires used to connect outside world.

Hysteresis: thermal hysteresis exists far more in internal control sensors than good-quality reference prats. Add 24 for AK, hi, or pr.

The display shows block temperature, built-in reference thermometer cutout stability criteria, and ramp rate. Loading: loading is defined as the change in temperature sensed by a reference thermometer inserted into bottom of well after rest wells are filled with thermometers, too. F button allows for easy switching of temperature units.

All are also compatible with model 9938 met temp ii software for completely automated Calibrations of RDS, Thermopylae's, and thermostats.

part #: 9173c156 prices

• $5679.00-$9500.00

specifications tecalib:

• brand: Fluke Calibration
• mpn: 9173-c-156
• upc: 095969294645

Shipping tecalib:

• handling: 30 days
• type: Calculated

General tecalib:

• condition: New
• businessindustrial > electricaltest equipment > test equipment business industrial > calibrators test equipment
• in stock: Yes

Returns tecalib:

• time: 14 Days
• details: Special orders, including all Thermal Imagers, are non-returnable. Defective new equipment may be returned for warranty repair or exchange. Items that have malfunctioned due to mishandling, electrical overload, etc. will be subject to a repair charge. Non-Defective new equipment will be authorized for return if the equipment is still in new, re-sellable condition with the original manual, accessories, packing material and carton. We reserve the right to reject returns in which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 20% of purchase price may apply.
• policy: returns accepted
• type: Money Back
• paid by: Buyer

Offer tecalib:

• Started: September 22, 2017, 2:46 pm
• bids: 0
• Sold: 0
• best offer: false
• quantity: 1

Ratings:

1. Great ! Thanks 09-22-17
2. good seller thank you 09-21-17
3. AAA 09-22-17
4. AAAA 09-22-17
5. Good ! Fast ship! 09-22-17

Seller tecalib:

• city: Melrose, Massachusetts
• zipcode: 02176

Payments tecalib:

• PayPal

Fluke Calibration 9173-C-156 Is Similar To:

• 095969288897 Fluke Calibration Silicone Oil Fr Thermometer Calibrator (43.2% similar) Shipping ballpark ships items to the 50 USA states via ups and USPS. Get-warranty and enter the item number in box on right side of screen. Since this is an open box item, some minor accessories like manuals or other non essential parts may not be included. Cosmetic condition retail box may show ...(February 13th, 2019)
• 1735 Fluke Used Simple Power Logger Nist Calibration (40.7% similar) If product property TAB4 title. Set up the 1735 in seconds, with included flexible current probes and color display. Enif if product property TAB6 title. Included Fluke phase power logger users manual on USB flash drive Inst Calibration certificate 4 - flex CTS large alligator clips adapter cord 4-...(November 8th, 2018)
• 6020 Hart Scientific Fluke High Temperature Calibration Oil Bath (36.7% similar) Testing and Calibration guarantee that your instruments are within oem specifications. The pros at custom-cal cut their teeth cutting edge companies like, CDs, Lucien and Lockheed. Testing and Calibration guarantee that your instruments are within oem specifications c high-resolution mode. Custom-...(January 3rd, 2019)
• 6022 Hart Fluke Model High Temperature Calibration Bath (37.8% similar) All statements regarding products and their configurations are made to the best of our ability with assumption that buyer is knowledgeable proficient in use this type equipment. High cost, value equipment, acquired from a reliable source. Comes as shown. Commercial or residential location, no means ...(October 24th, 2018)
• 6050h Hart Scientific Fluke Salt Bath High Temperature Calibration (31.1% similar) The bath is stable to our test equipment repair services can save forty percent or more compared original manufacturer oem flat rates. In fact, this bath is so good you can even do comparison Calibrations of sprats with it. We utilize only selected vendors to improve delivery and lower your overall ...(January 3rd, 2019)
• 6531-140m Fluke Calibration Electronic Deadweight 095969637039 (61% similar) When two q-rots are included, a half-turn valve isolates and protects the lo q-rapt from high pressure hi is in use. Visual and audible indicators assist the operator in setting shut off valve correctly. Add 24 for AK, hi, or pr. The Fluke Calibration 6351 RPM4-E-DWT uses an auto range feature to ...(January 4th, 2018)
• 6531-14m Fluke Calibration Electronic Deadweight 095969636995 (63.2% similar) The Fluke Calibration 6351 e-wt-h offers ease of use and precision continuous, real time electronic pressure measurement with simple direct control high quality manual hardware. Fluke Calibration electronic dead weight tester kits feature e-wt-h configurations combined with the accessories needed ...(November 22nd, 2017)
• 6531-20m Fluke Calibration Electronic Deadweight 095969637008 (58.1% similar) The RPM4-E-DWT is controlled locally by operator using its front panel display, keypad and optional foot pedal or remotely a computer ASCII character command strings over RS-232 interface. Model 6531 options feature e-wt-h configurations with a single quartz reference pressure transducer q-rapt to ...(October 23rd, 2017)
• 6531-40m Fluke Calibration Electronic Deadweight Tester Psi 095969637015 (54.7% similar) The e-wt-h can be powered with an optional battery charger pack for use in locations where ac power is not readily available. Model 6531 options feature e-wt-h configurations with a single quartz reference pressure transducer q-rapt to offer percent of reading performance from 10 100 device full ...(April 20th, 2018)
• 6531-70m Fluke Calibration Electronic Deadweight Tester Psi 095969637022 (53.1% similar) An included vacuum fill kit allows the e-wt to be filled with your choice of compatible fluid, while eliminating problematic air pockets from test circuit. Premium performance is wrapped up into one, compact, lightweight, transportable package. It can operate with a wide selection of test mediums, ...(April 13th, 2019)
• 6531-7m Fluke Calibration Electronic Deadweight 095969636988 (58.6% similar) Subscribe to our Fluke Calibration 6531-7M electronic dead weight tester, 7 map 1k psi brand: Fluke model number: 6531-7MREF no: 65317M condition: Newark: 88 data sheet product ranges available 200 30,000. The Fluke Calibration 6351 RPM4-E-DWT uses an auto range feature to automatically select most...(September 6th, 2017)