FLUKE CALIBRATION P3031-KGCM2 Gas Deadweight Tester 095969637855 70KGF-CM2

( Brand: Fluke Calibration ), ( Manufacturer Part Number: P3031-KGCM2 ), ( Part Type: Tester ), ( UPC: 095969637855 )

Review FLUKE CALIBRATION Gas Deadweight Tester Liquid

The Fluke P3031-KGCM2 Calibration Gas Deadweight Tester is a high-precision instrument designed for calibrating pressure gauges and transducers. This tester features a weight capacity of 70 kgf-cm (0.70 tonne-meter) and is designed to measure with an accuracy of 0.02%.

The P3031-KGCM2 is made of durable materials, including a stainless steel frame and a smooth, anodized aluminum piston. The tester's compact design allows for easy transportation and storage, while its rugged construction ensures that it can withstand the rigors of daily use in the field.

The tester features a large, easy-to-read dial with graduated markings in kgf-cm and psi. The dial is illuminated for use in low-light conditions, and the tester includes a built-in zero-point adjustment feature to ensure maximum accuracy.

The P3031-KGCM2 also includes a precision-machined piston and a high-quality, stainless steel load cell to ensure maximum durability and reliability. The load cell is factory-calibrated and is protected by a rugged, impact-resistant housing.

The tester is equipped with a built-in pressure gauge calibration check, which allows users to easily verify the accuracy of their pressure gauge calibrations. The tester also includes a built-in pressure relief valve to prevent overloading and damage to the load cell.

The Fluke P3031-KGCM2 Calibration Gas Deadweight Tester is an essential tool for any facility that relies on accurate pressure measurements. Its high precision, rugged construction, and easy-to-use design make it an ideal choice for calibrating pressure gauges and transducers in a wide range of industries, including oil and gas, manufacturing, and aerospace. With a weight capacity of 70 kgf-cm and an accuracy of 0.02%, the P3031-KGCM2 is a reliable and accurate instrument that will provide years of reliable service.

1. High precision and accuracy: This tester is designed to provide accurate and reliable measurements, making it suitable for calibration and verification of pressure transducers, load cells, and other pressure-sensitive devices.

2. Durable construction: The tester is built to withstand harsh environments and frequent use. It features a sturdy, corrosion-resistant frame and a strong, solid base to ensure stability and prevent damage.

3. Wide range of pressure capabilities: The tester can handle a wide range of pressures, from 0 to 70 kgf-cm2, making it suitable for a variety of applications.

4. Easy to use: The tester features an intuitive user interface and clear, easy-to-read digital display, making it simple to use even for those without extensive calibration experience.

5. Portable and compact: The tester is lightweight and easy to transport, making it an ideal choice for field calibrations and on-site testing.

1. Expensive: The tester is relatively expensive compared to other gas deadweight testers in the market, which may make it a prohibitive investment for some users.

2. Limited pressure range: Although the tester can handle a wide range of pressures, it may not be suitable for applications requiring higher or lower pressure ranges.

3. Requires calibration: Like any other precision instrument, the tester requires regular calibration to ensure its accuracy and reliability. This can be time-consuming and may require specialized equipment and expertise.

The Fluke Calibration Gas Deadweight Tester (Model: P3031-kgcm2, 70kgf-cm2, 095969637855) is a high-quality, durable, and accurate instrument suitable for calibration and verification of pressure-sensitive devices. Although it is relatively expensive, its precision and reliability make it a worthwhile investment for those requiring precise pressure measurements. However, users should consider its limited pressure range and the need for regular calibration before making a purchase decision.

For users requiring precise pressure measurements and looking for a durable, reliable, and easy-to-use gas deadweight tester, the Fluke Calibration Gas Deadweight Tester (Model: P3031-kgcm2, 70kgf-cm2, 095969637855) is a recommended choice. However, users should carefully consider their specific application requirements, such as pressure range and budget, before making a purchase decision.

Details:

A compressed gas bottle nitrogen or dry air fitted with pressure regulator is recommended. P3000 series liquid lubricated gas operated model's: the Fluke Calibration p3031 and p3032 feature an oil piston cylinder assembly, which ensures that instrument is less susceptible to performance issues caused by contamination of supply or environment in unit being. The masses for vacuum ranges and optional. Ne increment are stainless steel or aluminum.

Our experience and knowledge of piston cylinder production Calibration ensure the precision performance required for today?demanding requirements. There is no physical barrier between the gas and oil so some. Transfer potential.

For vacuum requirements, an external pump can be connected to the 1/4 inch port. The masses are stored in a high-quality case with self-locking mechanism to protect them during transit.

A special version of these instruments using hydro-carbon free fluid is available gas operated with optional hand pumps dual vacuum pressure model's available psi, bar, kgf cm2, KP and map ranges available piston cylinder design provides stability repeatability built-in pneumatic pumps for vacuum piston flotation indicator high quality needle valves provide optimum control mounted spirit level adjustable fattest station o-rings eliminates the need PDF tape or wrenches improved case spring loaded latches hood sturdy weight box hinged lid side handles easy transport Fluke Calibration P3031-KGCM2 deadweight tester, liquid lubricated, 70 cm2.

Gravity correction: varies significantly with geographical location and this variation has a direct effect on the force of weights accuracy deadweight tester. The Fluke Calibration p3000 series is culmination of over 50 years experience in production and design primary pressure standards. 5, 1 8, 4, 3 and 2 not bps female adaptors, operating fluid where applicable spare seals.

Masses: standard masses are series 3 non-magnetic astronautic stainless steel. Press cal software: windows-based software program that allows users to easily apply all necessary corrections enhance the deadweight tester performance. The use of press cal allows for an improved accuracy. These masses balance the upward force created by pressure within system.

Increased accuracy option of. Instrument base: there are four basic variations in the pneumatic offering single pressure, vacuum, dual vacuum and oil-lubricated pneumatically driven high-pressure model's. The supply gas, via deadweight tester controls, is introduced into piston cylinder chamber.

Ten percent above the maximum pressure is required. Each Fluke Calibration p3000 pneumatic deadweight testers is supplied with a detachable lid that makes it neat, compact and easily portable. With features designed to improve accuracy and performance, increase reliability simplify operation these deadweight testers can be used calibrate virtually any pressure sensing device, including transducers, transmitters, gauges or switches.

Subscribe to our Fluke Calibration P3031-KGCM2 gas deadweight tester, liquid lubricated, 70 kgf cm2 brand: Fluke model number: P3031-KGCM2ref no: p303cm2 condition: Newark: 55 data sheet product ranges from vacuum through 2000 psi 140 bar accuracy better than. Add 24 for AK, hi, or pr. All units are provided with an accredited Calibration certificate, m14x1. Gas supply: all instruments are fitted with a 1/4 inch not female external supply port for connection to the source.

Each mass is marked with the serial number of instrument and nominal pressure value relative to high or low-pressure piston, when applicable. Utilizing the well proven piston-gauge system consisting of a vertically mounted, precision lapped piston and cylinder assembly, accurately calibrated masses force are loaded on area, which rises freely within its. Calibration details are then stored and or used to automatically create a cert. Cater.s piston cylinder assemblies: the assembly is heart of each deadweight tester.

Each instrument can be calibrated to local gravity at no extra cost. Operating principle: Fluke Calibration p3000 deadweight testers are the primary standard for pressure measurements.

The Fluke Calibration p3031 and p3032 is designed to prevent inadvertent over. Ling of chamber, thus avoiding contamination gas system reading. As the gas acts directly on surface of oil, there is a rate-less transfer pressure within system.

The hand pump option is not available on instruments above 500 psi 3.

part #: p3031kgcm2 prices

• $4200.00-$29500.00

specifications tecalib:

• brand: Fluke Calibration
• mpn: P3031-kgcm2
• part type: Tester
• upc: 095969637855

Shipping tecalib:

• type: Calculated
• handling: 10 days

Payments tecalib:

• PayPal

Seller tecalib:

• zipcode: 02176
• city: Melrose, Massachusetts

Offer tecalib:

• quantity: 1
• Sold: 0
• Started: March 29, 2017, 11:38 am
• best offer: false
• bids: 0

Returns tecalib:

• details: Special orders, including all Thermal Imagers, are non-returnable. Defective new equipment may be returned for warranty repair or exchange. Items that have malfunctioned due to mishandling, electrical overload, etc. will be subject to a repair charge. Non-Defective new equipment will be authorized for return if the equipment is still in new, re-sellable condition with the original manual, accessories, packing material and carton. We reserve the right to reject returns in which there is no original packaging, missing accessories, damage or visible signs of usage of the item. A restocking fee of up to 20% of purchase price may apply.
• time: 14 Days
• paid by: Buyer
• policy: returns accepted
• type: Money Back

General tecalib:

• in stock: Yes
• condition: New
• businessindustrial > electricaltest equipment > test equipment business industrial > calibrators test equipment

Ratings:

1. Items just as described, trustwothy, fast shipping, asset to, A 03-28-17
2. Arrived quicker than expected and in great condition. 03-29-17
3. As advertised Fast shipment 03-28-17
4. Fast shipping, thank you. 03-29-17
5. As described and Responsible seller. 03-29-17

Fluke Calibration P3031-KGCM2 Is Similar To:

• 095969288897 Fluke Calibration Silicone Oil Fr Thermometer Calibrator (36.5% similar) Shipping ballpark ships items to the 50 USA states via ups and USPS. Get-warranty and enter the item number in box on right side of screen. Since this is an open box item, some minor accessories like manuals or other non essential parts may not be included. Cosmetic condition retail box may show ...(February 13th, 2019)
• 1735 Fluke Used Simple Power Logger Nist Calibration (34.9% similar) If product property TAB4 title. Set up the 1735 in seconds, with included flexible current probes and color display. Enif if product property TAB6 title. Included Fluke phase power logger users manual on USB flash drive Inst Calibration certificate 4 - flex CTS large alligator clips adapter cord 4-...(November 8th, 2018)
• 6020 Hart Scientific Fluke High Temperature Calibration Oil Bath (38% similar) Testing and Calibration guarantee that your instruments are within oem specifications. The pros at custom-cal cut their teeth cutting edge companies like, CDs, Lucien and Lockheed. Testing and Calibration guarantee that your instruments are within oem specifications c high-resolution mode. Custom-...(January 3rd, 2019)
• 6022 Hart Fluke Model High Temperature Calibration Bath (41.1% similar) All statements regarding products and their configurations are made to the best of our ability with assumption that buyer is knowledgeable proficient in use this type equipment. High cost, value equipment, acquired from a reliable source. Comes as shown. Commercial or residential location, no means ...(October 24th, 2018)
• 6050h Hart Scientific Fluke Salt Bath High Temperature Calibration (32.5% similar) The bath is stable to our test equipment repair services can save forty percent or more compared original manufacturer oem flat rates. In fact, this bath is so good you can even do comparison Calibrations of sprats with it. We utilize only selected vendors to improve delivery and lower your overall ...(January 3rd, 2019)
• 6531-140m Fluke Calibration Electronic Deadweight 095969637039 (73.9% similar) When two q-rots are included, a half-turn valve isolates and protects the lo q-rapt from high pressure hi is in use. Visual and audible indicators assist the operator in setting shut off valve correctly. Add 24 for AK, hi, or pr. The Fluke Calibration 6351 RPM4-E-DWT uses an auto range feature to ...(January 4th, 2018)
• 6531-14m Fluke Calibration Electronic Deadweight 095969636995 (74.6% similar) The Fluke Calibration 6351 e-wt-h offers ease of use and precision continuous, real time electronic pressure measurement with simple direct control high quality manual hardware. Fluke Calibration electronic deadweight tester kits feature e-wt-h configurations combined with the accessories needed for...(November 22nd, 2017)
• 6531-20m Fluke Calibration Electronic Deadweight 095969637008 (76.3% similar) The RPM4-E-DWT is controlled locally by operator using its front panel display, keypad and optional foot pedal or remotely a computer ASCII character command strings over RS-232 interface. Model 6531 options feature e-wt-h configurations with a single quartz reference pressure transducer q-rapt to ...(October 23rd, 2017)
• 6531-40m Fluke Calibration Electronic Deadweight Tester Psi 095969637015 (69.8% similar) The e-wt-h can be powered with an optional battery charger pack for use in locations where ac power is not readily available. Model 6531 options feature e-wt-h configurations with a single quartz reference pressure transducer q-rapt to offer percent of reading performance from 10 100 device full ...(April 20th, 2018)
• 6531-70m Fluke Calibration Electronic Deadweight Tester Psi 095969637022 (68.2% similar) An included vacuum fill kit allows the e-wt to be filled with your choice of compatible fluid, while eliminating problematic air pockets from test circuit. Premium performance is wrapped up into one, compact, lightweight, transportable package. It can operate with a wide selection of test mediums, ...(April 13th, 2019)
• 6531-7m Fluke Calibration Electronic Deadweight 095969636988 (75.2% similar) Subscribe to our Fluke Calibration 6531-7M electronic deadweight tester, 7 map 1k psi brand: Fluke model number: 6531-7MREF no: 65317M condition: Newark: 88 data sheet product ranges available 200 30,000. The Fluke Calibration 6351 RPM4-E-DWT uses an auto range feature to automatically select most ...(September 6th, 2017)