1. Calibrators Test Equipment For Sale
  2. sku: 1043276942596323
  3. FLUKE CALIBRATION 9171-D-R-156

FLUKE CALIBRATION 9171-D-R-156 Metrology Insd 095969294225 30C 115V

9171-d-r-156 Fluke Calibration Metrology Well Insd Ref 095969294225

( Brand: Fluke Calibration ), ( Manufacturer Part Number: 9171-D-R-156 ), ( UPC: 095969294225 )

Review FLUKE CALIBRATION 9171 156 Metrology Well 30c Insd Ref 115v

The Fluke Calibration 9171-D-R-156 is a high-precision, digital multimeter designed for metrology applications. This versatile instrument is equipped with an 115V AC-DC voltage measurement range, making it suitable for a wide range of electrical testing needs.

The 9171-D-R-156 features an 11-digit resolution, ensuring unparalleled accuracy in your measurements. Its Auto-Ranging function automatically selects the appropriate range, reducing the risk of errors due to incorrect selection. The instrument also boasts a 0.0005% basic accuracy, ensuring that your measurements are as precise as possible.

This Fluke Calibration multimeter is housed in a rugged, water-resistant enclosure, offering protection against accidental drops and harsh environmental conditions. The large, backlit LCD display provides easy-to-read measurements, even in low-light conditions.

The 9171-D-R-156 is designed with a low-pass filter, which helps to eliminate noise and interference, providing you with clean, accurate readings. It also includes a data hold function, allowing you to temporarily freeze the displayed measurement for easy reference.

This Fluke Calibration multimeter is equipped with a 3000 count input impedance, ensuring minimal load on the DUT (Device Under Test). It also features a safety category III, 1000V CAT III, 600V CAT IV rating, ensuring the safety of both the user and the equipment during use.

In conclusion, the Fluke Calibration 9171-D-R-156 is a powerful, accurate, and reliable digital multimeter ideal for metrology applications. Its advanced features, rugged construction, and high safety ratings make it a must-have tool for any professional in the field of electrical testing.

The Fluke Calibration 9171-D-R-156 Metrology 30C INSD 115V (095969294225) is a high-precision voltage calibrator designed for various industries, including aerospace, defense, and power generation. Here are its pros and cons:

Pros:

1. High Accuracy: The calibrator offers a high accuracy of 0.0025% of reading 2 ppm/ C, which is suitable for applications requiring high precision.

2. Wide Range: With a voltage range of 100 mV to 15,000 V, this calibrator can be used in various applications.

3. Temperature Compensation: It has built-in temperature compensation, ensuring accurate readings regardless of ambient temperature changes.

4. Rugged Design: The calibrator has a robust, compact design, making it suitable for field use.

5. USB Interface: The calibrator has a USB interface, allowing easy data transfer and calibration.

Cons:

1. Expensive: The Fluke Calibration 9171-D-R-156 is a high-end calibrator and is quite expensive compared to other calibrators in the market.

2. Limited Inputs: It only has one input, which might be a limitation for applications requiring multiple inputs.

3. No Battery Option: The calibrator requires a power supply, and there is no battery option available, which might be inconvenient for field use.

Conclusion:

The Fluke Calibration 9171-D-R-156 is a high-precision calibrator suitable for industries requiring high accuracy. Its high accuracy, wide voltage range, and built-in temperature compensation make it an excellent choice for various applications. However, its high price and limited inputs may be a limitation for some users. If the high accuracy and wide voltage range are important to your application, this calibrator is an excellent investment. If you are looking for a more affordable option, you might want to consider other calibrators with fewer features.

Details:

Off-the-shelf controllers used by most dry-well manufacturers simply can. Provide this level of performance. The user interface can be configured to display in English, french, or Chinese. For metrology wells, loading effects are minimized the same reasons that axial gradients.

The cold units and provide radial uniformity of. The display shows block temperature, built-in reference thermometer cutout stability criteria, and ramp rate. Both low-temperature units are table to. Not only does it help minimize axial gradient and loading effects, helps address the unique immersion characteristics of each thermometer tested in heat source.

Such performance doesn. Exist anywhere else outside of fluid baths. Hysteresis: thermal hysteresis exists far more in internal control sensors than good-quality reference prats. Those characteristics include the location and size of actual sensor within probe, width thermal mass lead wires used to connect outside world.

Add 24 for AK, hi, or pr. Better stability can only be found in fluid baths and primary fixed-point devices. In short, there are six critical components of performance an industrial heat source which the European metrology community explains, for example, document ea-10 13: calibrated display accuracy, stability, axial vertical uniformity, radial well-to-well impact from loading, and hysteresis. Our specs aren. Just hopes or guidelines.

The Fluke Calibration 9171 series only gets better with metrology wells. Loading: loading is defined as the change in temperature sensed by a reference thermometer inserted into bottom of well after rest wells are filled with thermometers, too. All are also compatible with model 9938 met temp ii software for completely automated Calibrations of RDS, Thermopylae's, and thermostats. Loading effects are as minimal.

All four model's come with an rs-232 serial interface and the model 9930, interface-it software. New analog and digital control techniques provide stability as good.

Display accuracy: dry-wells are typically calibrated by inserting a Prut into one of the wells and making adjustments to calibrator. ?internal control sensor based on readings from. Immersion depth: depth matters. C in the cold units. C over a 60mm 2.

Just like the Fluke Calibration 9170, this dry-well has exceptional axial and radial uniformity. It is evidenced by the difference in two external measurements of same set-point tempera-true when that temperature approached from different directions hotter or colder and usually largest at midpoint a heat source.

C radial uniformity: uniformity is the difference in temperature between one well and another. There is an automated. Switch test protocol that zeros in on the. Dead-band for thermal switches. It exists because control sensors are typically designed for ruggedness and do not have the. Strain free. Design characteristics of sprats, or even most prats.

Vertical gradients in these zones range from. 25 in diameter or smaller. For even better accuracy, Fluke Calibration 9171 metrology well calibrators may be ordered with built-in electronics reading external prats its-90 characterizations. And we utilize proprietary dual-zone controls.

For hart scientific 9171 metrology wells, hysteresis effects range from.

And with dual-zone control, axial or vertical uniformity is as good. For metrology wells, we define our specification as the largest temperature difference between vertically homogeneous zones of any two wells that are each 6.

This is complicated by the presence of significant thermal gradients in block and inadequate sensor immersion into blocks that are simply too short. Axial uniformity: the Fluke Calibration 9170 series ea document suggests that dry-wells should include a zone of maximum temperature homogeneity, which extends for 40mm. C over their full range. Even without a pc, metrology wells have four different reprogrammed Calibration tasks that allow up to eight temperature set points with. Ramp and soak times between each. With groundbreaking new pro-primary electronics from Fluke Calibration patents pending, metrology wells let you bring lab-quality performance into whatever field environment might work in.

C at the most commonly used temperatures to. This has limited value because the unique characteristics of reference Prut, which essentially become. Calibrated into calibrator, are often quite different from thermometers tested by calibrator. Temperature range from -30. CFO cold units Fluke Calibration 9171-D-R-156 metrology well calibrator, -30c,w 9171-insd,w ref, 115v.

The display of 9171 is calibrated to an accuracy.

Stability: heat sources from Fluke Calibration have long been known as the most stable in world. For poorly designed heat sources, or when large-diameter probes are used, these differences can be very large. C all way to 155. C with full-range stability. The Fluke Calibration 9170 series metrology well calibrators uses only traceable, accredited prats to calibrate wells and our proprietary electronics consistently demonstrate repeatable accuracy more than ten times better specs, which range from.

C over its full range. F button allows for easy switching of temperature units.

54 in, usually at the bottom of a well.

specifications tecalib:

  • brand: Fluke Calibration
  • mpn: 9171-d-r-156
  • upc: 095969294225

Seller tecalib:

  • rating 02-15-19: 99.0%
  • # feedbacks 02-15-19: 23169
  • city: Melrose, Massachusetts
  • zipcode: 02176

Payments tecalib:

  • PayPal

Returns tecalib:

  • type: Money back or replacement buyers choice
  • policy: returns accepted
  • time: 30 Days
  • paid by: Buyer

Offer tecalib:

  • bids: 0
  • Started: February 14, 2019, 3:48 pm
  • best offer: false
  • Sold: 0
  • quantity: 1

General tecalib:

  • in stock: Yes
  • condition: New
  • Calibrators > Other Calibrators

Ratings:

  1. FAST SHIP 02-14-19
  2. Fast and easy to deal with 02-15-19
  3. A 02-14-19
  4. NEW AS DESCRIBED 02-14-19
  5. Perfect transaction! Thanks! 02-13-19

Shipping tecalib:

  • cost: $24.95
  • handling: 5 days
  • type: Flat
category: business & industrial > calibrators, sku: 1043276942596323,
Review#1 FAST SHIP ()
Review#2 Fast and easy to deal with ()
Review#3 A ()
Review#4 NEW AS DESCRIBED ()
Review#5 Perfect transaction! Thanks! ()
Fluke Calibration 9171-D-R-156 Is Similar To:
  • (44.1% similar) Shipping ballpark ships items to the 50 USA states via ups and USPS. Get-warranty and enter the item number in box on right side of screen. Since this is an open box item, some minor accessories like manuals or other non essential parts may not be included. Cosmetic condition retail box may show ...(February 13th, 2019)
  • (35.3% similar) If product property TAB4 title. Set up the 1735 in seconds, with included flexible current probes and color display. Enif if product property TAB6 title. Included Fluke phase power logger users manual on USB flash drive Inst Calibration certificate 4 - flex CTS large alligator clips adapter cord 4-...(November 8th, 2018)
  • (33.6% similar) Testing and Calibration guarantee that your instruments are within oem specifications. The pros at custom-cal cut their teeth cutting edge companies like, CDs, Lucien and Lockheed. Testing and Calibration guarantee that your instruments are within oem specifications c high-resolution mode. Custom-...(January 3rd, 2019)
  • (34.4% similar) All statements regarding products and their configurations are made to the best of our ability with assumption that buyer is knowledgeable proficient in use this type equipment. High cost, value equipment, acquired from a reliable source. Comes as shown. Commercial or residential location, no means ...(October 24th, 2018)
  • (28.6% similar) The bath is stable to our test equipment repair services can save forty percent or more compared original manufacturer oem flat rates. In fact, this bath is so good you can even do comparison Calibrations of sprats with it. We utilize only selected vendors to improve delivery and lower your overall ...(January 3rd, 2019)
  • (57.4% similar) When two q-rots are included, a half-turn valve isolates and protects the lo q-rapt from high pressure hi is in use. Visual and audible indicators assist the operator in setting shut off valve correctly. Add 24 for AK, hi, or pr. The Fluke Calibration 6351 RPM4-E-DWT uses an auto range feature to ...(January 4th, 2018)
  • (59.4% similar) The Fluke Calibration 6351 e-wt-h offers ease of use and precision continuous, real time electronic pressure measurement with simple direct control high quality manual hardware. Fluke Calibration electronic dead weight tester kits feature e-wt-h configurations combined with the accessories needed ...(November 22nd, 2017)
  • (54.7% similar) The RPM4-E-DWT is controlled locally by operator using its front panel display, keypad and optional foot pedal or remotely a computer ASCII character command strings over RS-232 interface. Model 6531 options feature e-wt-h configurations with a single quartz reference pressure transducer q-rapt to ...(October 23rd, 2017)
  • (51.8% similar) The e-wt-h can be powered with an optional battery charger pack for use in locations where ac power is not readily available. Model 6531 options feature e-wt-h configurations with a single quartz reference pressure transducer q-rapt to offer percent of reading performance from 10 100 device full ...(April 20th, 2018)
  • (53.2% similar) An included vacuum fill kit allows the e-wt to be filled with your choice of compatible fluid, while eliminating problematic air pockets from test circuit. Premium performance is wrapped up into one, compact, lightweight, transportable package. It can operate with a wide selection of test mediums, ...(April 13th, 2019)
  • (56.7% similar) Subscribe to our Fluke Calibration 6531-7M electronic dead weight tester, 7 map 1k psi brand: Fluke model number: 6531-7MREF no: 65317M condition: Newark: 88 data sheet product ranges available 200 30,000. The Fluke Calibration 6351 RPM4-E-DWT uses an auto range feature to automatically select most...(September 6th, 2017)

Copyright © tecalib.com